气体中毒窒息事故的环境应急监测

以株洲市攸县某矿业公司"5·7"重大中毒窒息事故的环境应急监测为例，详细阐述了该事故开展应急监测的全过程。针对锁定污染因子、查找污染源、判断污染团的扩散趋势以及监控敏感点的安全等监测目的设计监测方案。通过监测数据分析确定事故特征因子为CO，其周边环境空气中浓度随着与抽风口距离的增加而快速下降，监测到附近居民区环境空气质量未受事故影响。     

垃圾填埋场室内模拟试验注水量确定方法及其应用

针对填埋场室内模拟试验往往忽略降雨径流和初损的问题,提出运用SCS模型确定室内模拟试验日注水量的方法,并将计算结果应用于成都长安填埋场室内模拟试验中.结果表明,采用SCS模型计算所得的日入渗量进行注水的模拟柱渗滤液产量和水质变化能够更准确的模拟填埋场实际情况.     

锅炉环境影响评价系统软件研究

用Ｃ语言作为开发语言，研制开发了锅炉环境影响评价系统软件，软件充分利用Ｃ语言模块化，过程化的优点，源程序由１２个模块组成。经编译连接生成一个可执行程序，用户只需输入１５个必需的原始参数，软件即可自动查询，计算大量的中间参数，并立即给出污染源强及污染物在周围环境中分布的预测和评价结果。     

Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

Degradation of Pesticides on Plant Surfaces and its Prediction - A Case Study on Tea Plant

The degradative kinetics of pesticides on plant surface are characterized by an initial rapid degradation which follows a first-order kinetics, then transferred to a more slower degradative rate. The degradative process mainly consists of photodegradation, evaporation, rainfall elution and growth dilution. The influencing parameters of these processes were investigated by using the tea plant as a case study. The predictive model of the initial concentration, photodegradation rate constant, evaporation rate constant, rainfall elution rate, growth dilution rate and the total degradation rate was discussed and verified in four locations situated in the range of 25°-30°N latitude, and acceptable results were obtained.     

Modeling photocatalytic destruction of the organic contaminants in continuous stir flow reactor

Thin-film technique is becoming an industry standard for the preparation of TiO₂-based photocatalyst for organic destruction. The catalyst provides several advantages over the conventional powder TiO₂ in the treatment of wastewater and groundwater. In this study, a continuous stir flow reactor model is developed capable of describing the photocatalytic process. The model incorporates the following fundamental mechanisms: adsorption, diffusion, liquid-film transfer, UV attenuation, and photocatalytic reaction. All of the simulation results indicate that there exists a highly nonlinear relation between each of these parameters and the destruction rate. Various incident light intensities also are incorporated to simulate the energy efficiency. The simulations illustrate that the photocatalytic model can be used to elucidate the effect of process variables. It is also possible to “custom-design” a catalyst for the treatment of a particular waste stream.     

基于在线监测和SWMM模型的合流制排水体制系统化提升方案评估研究

合流制溢流污染严重威胁着下游受纳水体的水环境质量。为科学评估基于海绵城市理念的合流制排水体制系统化提升方案在解决老城区合流制溢流污染方面的效果,以嘉兴市老城区为研究对象,采用在线监测技术和SWMM数学模型相结合的方式,对嘉兴市老城区合流制排水体制系统化提升方案进行了全面评估。经在线监测评估发现,完成海绵城市改造后,嘉兴市老城区在研究期内的溢流频次减少为26次,小雨不会产生溢流;经SWMM模拟评估发现,完成海绵城市改造后,老城区合流制溢流口年溢流频次减少了132.2次。整体来看,基于海绵城市理念的合流制排水体制系统化提升方案突破了传统末端治理的局限,从雨污水产生、收集的全过程对合流制排水体制进行了系统化整治,对于提升全局水环境质量效果显著。     

夜间建筑施工噪声扰民监测方法探讨

以一家夜间施工工地为例 ,通过对现有夜间建筑施工噪声测量方法及国家和深圳经济特区有关噪声污染定义的分析 ,阐述了夜间施工工地噪声扰民监测方法     

Evaluation of interference to conventional and real-time PCR for detection and quantification of fungi in dust

Advances in polymerase chain reaction (PCR) have permitted accurate, rapid and quantitative identification of microorganisms in pure cultures regardless of viability or culturability. In this study, a simple sample processing method was investigated for rapid identification and quantification of fungal spores from dust samples using both conventional and real-time PCR. The proposed method was evaluated for susceptibility to interference from environmental dust samples. Stachybotrys chartarum and Aspergillus fumigatus were used as test organisms. The sensitivity of detection in pure culture was 0.1 spore DNA equivalents per PCR reaction corresponding to 20 spores ml(-1) in the sample. However, 1 spore DNA equivalent per PCR reaction corresponding to 200 spores ml(-1) in the sample was the lowest amount of spores tested without interference in dust samples spiked with spores of either fungal species. The extent of inhibition was calculated using conventional and real-time PCR reactions containing fungal spores, specific primers, specific probes (for real-time PCR) and various amounts of dust. The results indicate that the extent of inhibition by dust on PCR varies with the type and amount of dust, and number of spores. No interference in the analysis of spiked samples was detected from 0.2 mg ml(-1) of four real-life dust samples at p-value >0.05 using 2 x 10(4) spores for conventional PCR and 2 x 10(5) spores for real-time PCR. However, samples containing >0.2 mg ml(-1) real-life dust compromised the PCR assay. These results suggest the potential usefulness of a simple sample processing method in conjunction with PCR for monitoring the fungal content of aerosols collected from indoor environments.     

厌氧填埋垃圾降解阶段指标体系的建立

以厌氧填埋场中垃圾的降解过程为依托点,从渗滤液的水质特征和填埋气的组成两个方面筛选出判断指标,最后建立判断填埋垃圾降解阶段的指标体系.结果表明,ρ(BOD5)/ρ(COD)可以反映出渗滤液的可生化性,从而间接反映出填埋垃圾所处的降解阶段,是判断填埋垃圾降解阶段的重要定量指标.